Discover what Section 232 tariffs are, who they affect, and current rates.
This guide covers the U.S. Section 232 national security tariffs on steel and aluminum, as they apply today under Proclamation 11032 (effective June 8, 2026). It applies to any importer of steel, aluminum, or an enumerated derivative article, regardless of entry type — formal entry, informal entry, or postal/international mail — and regardless of trade preference, since FTA duty-free treatment does not exempt these goods (see "Free trade agreements" below).
Confirm current rates before shipping
Rates, product lists, and country arrangements continue to change. Always confirm current treatment against the applicable CBP CSMS message before shipping or filing.
Section 232 of the Trade Expansion Act of 1962 (19 U.S.C. § 1862) lets the President adjust imports — through tariffs, quotas, or import agreements — when the Department of Commerce finds that the imports "threaten to impair the national security." Two active programs target the metals covered here: Steel (Proclamation 9705, 2018, modified by 11032) and Aluminum (Proclamation 9704, 2018, modified by 11032). Duties apply to the full customs value of the article, not just the metal content (since April 6, 2026). Proclamation 11032 also covers a separate Section 232 program on copper, not addressed on this page.
Reduced/exempt rates are never automatic — they require the supporting origin data (melt-and-pour for steel, smelt-and-cast for aluminum) to be reported at entry. Formal entry supports this reporting, so eligible shipments can access the U.S.-content, country-specific, or de minimis rates below. Postal/international mail currently does not support these data elements, so covered postal shipments default to the standard (highest applicable) rate — and once a postal duty is assessed, there is no process to amend the entry or recover it. From October 22, 2026, Chapter 98/99-dutiable goods are excluded from postal informal entry entirely and must move through formal entry.
Covered products include flat-rolled steel, bars, rods, wire, pipe, tube, structural shapes, and semi-finished forms (ingots, billets, slabs). Enumerated derivatives include nails, wire cloth, cables, structural components, tanks, drums, and, added by Proclamation 11032, steel storage racks.
Importers must report the country of melt and pour (where the steel was originally melted in a steelmaking furnace and first cast into solid form). Steel melted and poured in the U.S. qualifies for the 10% rate; steel melted and poured in the U.K. qualifies for the U.K. preferential rate (below).
Covered products include unwrought aluminum, bars, rods, profiles, wire, plates, sheet, foil, tubes, and pipes. Enumerated derivatives include extrusions, cables and conductors, cans and containers, and, added by Proclamation 11032, aluminum lithographic plates.
Importers must report both the country of primary smelt (where alumina was reduced to primary aluminum) and the country of most recent cast. Aluminum smelted and cast in the U.S. qualifies for the 10% rate. Any article containing primary aluminum smelted or cast in Russia is subject to the 200% rate — this reaches down through the supply chain into derivatives.
EU, Japan, South Korea, Argentina, Ecuador, Switzerland, and Taiwan all qualify for the Annex I-C 15% rate on mobile industrial equipment (see Current rates above) — rows below list only what's additional to that.
Country↕
Treatment↕
United Kingdom
25% (instead of 50%) on Annex I-A; 15% (instead of 25%) on Annex I-B, if melted-and-poured/smelted-and-cast in the U.K. Established under the U.S.–U.K. Economic Prosperity Deal.
European Union
Civil aircraft and parts exempt. Reduced tariff-rate quotas being negotiated.
Japan, South Korea
Civil aircraft exemptions. Standard Annex I-A/I-B rates otherwise.
Canada, Mexico (USMCA)
No preferential Section 232 rate. USMCA-qualifying derivative steel can have its U.S.-content portion (up to 40% of article value) enter at 0%, with the remainder at the standard rate.
Argentina, Ecuador, Switzerland, Taiwan
Annex I-C only — no additional treatment beyond that.
Russia
200% on aluminum articles/derivatives containing Russian-smelted or cast primary aluminum. Russian-origin steel does not receive standard MFN rates (Column 2 applies) and is often blocked by separate sanctions — verify OFAC restrictions.
Section 232 is a national security measure and overrides FTA tariff preferences — a steel/aluminum article that would enter duty-free under USMCA, KORUS, or any other FTA still owes the Section 232 duty, and Chapter 98 provisions don't relieve it unless the carve-out is written into the proclamation. (FTA-based TRQs, like the EU framework, are being renegotiated inside the Section 232 process itself.) USMCA compliance still matters for U.S.-content treatment on Canadian/Mexican derivative steel (see above).
Within Section 232, only one rate applies per article — autos/auto parts take priority over steel/aluminum, and an article covered by both metals is only charged once. Outside Section 232, Column 1 (MFN) duties, Section 301 duties, and AD/CVD all stack on top of it.
This guide is informational and does not constitute legal or customs advice. Consult a licensed customs broker or trade attorney for entry-specific determinations.
Section 232 — steel and aluminum
Section 232 — steel and aluminum
Discover what Section 232 tariffs are, who they affect, and current rates.
This guide covers the U.S. Section 232 national security tariffs on steel and aluminum, as they apply today under Proclamation 11032 (effective June 8, 2026). It applies to any importer of steel, aluminum, or an enumerated derivative article, regardless of entry type — formal entry, informal entry, or postal/international mail — and regardless of trade preference, since FTA duty-free treatment does not exempt these goods (see "Free trade agreements" below).
Rates, product lists, and country arrangements continue to change. Always confirm current treatment against the applicable CBP CSMS message before shipping or filing.
What Section 232 is
Section 232 of the Trade Expansion Act of 1962 (19 U.S.C. § 1862) lets the President adjust imports — through tariffs, quotas, or import agreements — when the Department of Commerce finds that the imports "threaten to impair the national security." Two active programs target the metals covered here: Steel (Proclamation 9705, 2018, modified by 11032) and Aluminum (Proclamation 9704, 2018, modified by 11032). Duties apply to the full customs value of the article, not just the metal content (since April 6, 2026). Proclamation 11032 also covers a separate Section 232 program on copper, not addressed on this page.
Key dates affecting Section 232 steel/aluminum treatment
What it means for shipments
Reduced/exempt rates are never automatic — they require the supporting origin data (melt-and-pour for steel, smelt-and-cast for aluminum) to be reported at entry. Formal entry supports this reporting, so eligible shipments can access the U.S.-content, country-specific, or de minimis rates below. Postal/international mail currently does not support these data elements, so covered postal shipments default to the standard (highest applicable) rate — and once a postal duty is assessed, there is no process to amend the entry or recover it. From October 22, 2026, Chapter 98/99-dutiable goods are excluded from postal informal entry entirely and must move through formal entry.
Current rates
Steel
Covered products include flat-rolled steel, bars, rods, wire, pipe, tube, structural shapes, and semi-finished forms (ingots, billets, slabs). Enumerated derivatives include nails, wire cloth, cables, structural components, tanks, drums, and, added by Proclamation 11032, steel storage racks.
Importers must report the country of melt and pour (where the steel was originally melted in a steelmaking furnace and first cast into solid form). Steel melted and poured in the U.S. qualifies for the 10% rate; steel melted and poured in the U.K. qualifies for the U.K. preferential rate (below).
Aluminum
Covered products include unwrought aluminum, bars, rods, profiles, wire, plates, sheet, foil, tubes, and pipes. Enumerated derivatives include extrusions, cables and conductors, cans and containers, and, added by Proclamation 11032, aluminum lithographic plates.
Importers must report both the country of primary smelt (where alumina was reduced to primary aluminum) and the country of most recent cast. Aluminum smelted and cast in the U.S. qualifies for the 10% rate. Any article containing primary aluminum smelted or cast in Russia is subject to the 200% rate — this reaches down through the supply chain into derivatives.
Country arrangements
EU, Japan, South Korea, Argentina, Ecuador, Switzerland, and Taiwan all qualify for the Annex I-C 15% rate on mobile industrial equipment (see Current rates above) — rows below list only what's additional to that.
Free trade agreements and stacking
Section 232 is a national security measure and overrides FTA tariff preferences — a steel/aluminum article that would enter duty-free under USMCA, KORUS, or any other FTA still owes the Section 232 duty, and Chapter 98 provisions don't relieve it unless the carve-out is written into the proclamation. (FTA-based TRQs, like the EU framework, are being renegotiated inside the Section 232 process itself.) USMCA compliance still matters for U.S.-content treatment on Canadian/Mexican derivative steel (see above).
Within Section 232, only one rate applies per article — autos/auto parts take priority over steel/aluminum, and an article covered by both metals is only charged once. Outside Section 232, Column 1 (MFN) duties, Section 301 duties, and AD/CVD all stack on top of it.
Sources
This guide is informational and does not constitute legal or customs advice. Consult a licensed customs broker or trade attorney for entry-specific determinations.
Was this page helpful?